AB44 - Standard series

This 3-piece Ball Valve is the most easily on-line maintainable in its class. By removing three body connector bolts and loosening the fourth, the body can be swung away using the fourth bolt as the fulcrum, to carry out any installation or maintenance operation on the valve, thus reducing downtime. This valve can be offered in a wide variety of body and seat combinations.

AFB44 - Fire-safe series

This 3-piece fire-safe design Ball Valve features a secondary metal seat which renders the valve firesafe. When the seat is totally sublimated in a fire, the ball moves and rests against the lip, forming a metalto- metal seat, thus ensuring leak-tightness

Specifications   Pressure Testing Test pressures  
Max. cold working pressure 69kg/cm2 for screwed/socketweld
end valves with PTFE
103kg/cm2 for screwed/socketweld
end valves with polyfill
As per flange rating for flanged
    Ends kg/cm2 (psi)
    Shell Scr./Socket weld (air)
Flanged 150 (hydrostatic)
Flanged 300 (hydrostatic)
Flanged 600 (hydrostatic)
Valve design BS 5159 for A44 Series
BS 5351 for AF44 Series
  Seat All valves (air) 5.6 (80)
Fire Test (for AFB44)
API 607 4th edition
Testing API 598 for flanged valves
  NOTE Pressure testing as per BS 6755 available on
special request.
Shell hydrostatic test can be done for screwed
and socket-weld end valves on special request.
Shell hydrostatic test can be done as per Class
800 rating for both versions on special request.
Face-to-face dimensions ASME B16.10 for flanged
valves and AIL Standard for
screwed/socket-weld end


F15 Fire-safe Series (Class 150) F30
Fire-safe Series (Class 300)

These high performance full bore ball valves come in single-piece design (in sizes of 15 - 40mm) as well as in two-piece design (in sizes of 50 - 200mm). Advanced features such as fire safety, antistatic capability, cavity relief and blow-out proof stem are built into these valves. They are supplied with an integral actuator mounting flange with drilled and tapped holes conforming to ISO 5211.

Specifications   Pressure Testing Test pressures  
Valve design BS 5351     Ends kg/cm2 (psi)
    Shell Class 150 (hydrostatic)
Class 300 (hydrostatic)
Fire test API 607, 4th edition  
  Seat Class 150 (air)
Class 300 (air)
Pressure testing API 598 (testing as per
BS 6755 Part I on special
Face-to-face dimensions ASME B16.10
(compliance to BS 2080 can
be offered on request)
End flange dimensions ASME B16.5 Class 150 RF
and Class 300 RF

About Company

Company has been a pioneer and has retained its leadership position in supplying seamless Pipes, Industrial Valves, flanges & Pressure/Temp. Gauges, Instruments, Actuators & Structural Steel materials.

Terms of Use
Privacy Policy

Quality Assurance

Quality is our prime concern and we ensure to maintain it at each level of our organization. We ensure that the products were manufactured at client's end are at par with international standards. It has a separate setup for quality control, which is manned by trained quality inspectors, who keep a stringent eye on each detail of product specifications hence keeping the quality intact followed by Mechanical tests.

Get in Touch

Strong opinions come by truckloads in the luxury watch industry and replica watches collectors tendencies to disagree with each other any given time; Seiko is one of the rolex replica sale brands that most of them find easy to fall in love with. There are good reasons. Seiko, for decades, rivaled the best in European horology world and rolex replica sale has been influential throughout. Revered for precision, craftsmanship and flawless reproduction of old-school approaches, the replica watches sale has a great dial work and the quartz movement is a high-performance engine that consumes very little power. The breitling replica sale is not hand-assembled except for a few replica watches sale final touches, but the adjustments and related stuff are exclusively done by master watchmakers.